industries corp. 5625-a s. arville, las vegas, nv 89118 tel:702-364-9998 fax: 702-364-1562 www.magtechind.com anz094i led driver product specifications anz#: z094i, october 9, 2008 lp1040-xx series switch-mode led driver total power 40 watts input voltages 90 ~ 264vac, 277vac number of outputs one special features electrical specifications ? ul1310, class 2 and ul48 compliant ? single output, ranged from 10v up to 36vdc ? ip66 compliant ? suitable for dry and damp locations ? designed for outdoor or indoor applications ? suitable in standard electrical junction boxes ? compact, lightweight ? active pfc reduces power consumption input range frequency power factor crest factor inrush current input current efficiency emi filtering maximum power current accuracy load regulation leakage current hold up time protection 90 ~ 264 vac, 277vac (optional) 47 to 63 hz > 0.90 at full load, 115vac 1.5 max. 30.0 amps maximum at 230vac, cold start, 25o c 0.50 amps maximum at 115vac 85% typical at maximum load 47cfr, part 2, part 15 and cispr pub, 22 class b 40w 1% (when applicable) 3% n/a 300ua typ. half cycle minimum at 120 vac and 80% of rated load over-voltage, over current and short circuit protection: auto-recovery environmental operating temperature: -30 to 60 o c (de-rating : 1% per o c from 60~70oc ) storage temperature: -40 to 85 o c humidity (non-condensing): 5% to 95% cooling: convection vibration frequency: 5 to 50 hz mtbf: >100,000 hours at full load and 25oc ambient conditions (mil-217f) emc : compliant to 47cfr, part 2, part15 and cispr pub, 22 class b safety ul ul1310, class 2 and ul879 recognized cul ul1310, class 2 and ul879 recognized ce certified model number constant volta g e mode model number constant current mode out p ut out p ut v ( dc ) a ( ma ) watts v ( dc ) ma ( max. ) watts lp1040-36 36 , 5% 111 - 1100 40 lp1040-36-cxxxx 18~ 36 1110 , 5% 40 lp1040-24 24 , 5% 167 - 1670 40 lp1040-24-cxxxx 12~ 24 1670 , 5% 40 lp1040-22 22 , 5% 182 - 1820 40 lp1040-22-cxxxx 12 ~ 22 1820 , 5% 40 lp1040-18 18 , 5% 222 - 2220 40 lp1040-18-cxxxx 9 ~ 18 2200 , 5% 40 lp1040-15 15 , 5% 268 - 2680 40 lp1040-15-cxxxx 9 ~ 15 2680 , 5% 40 lp1040-13 13 , 5% 308 - 3080 40 lp1040-13-cxxxx 7 ~ 13 3080 , 5% 40 lp1040-12 12 , 5% 333 - 3330 40 lp1040-12-cxxxx 7 ~ 12 3330 , 5% 40 lp1040-10 10 , 5% 400 - 4000 40 lp1040-10-cxxxx 6 ~ 10 4000 , 5% 40 lp1040-09 9 , 5% 445 - 4450 40 lp1040-09-cxxxx 6 ~ 9 4450 , 5% 40 lp1040-09 5 , 5% 445 - 4450 note: the output current of co nstant current models are adjustable at factory from 50% ~ 100%. recommend application schematics lp1040 40w, 24vdc this configuration is based on led with the following parameters: v : 3.0v ~ 3.5v i : 300ma ~ 350ma a. i : 300ma ~ 350ma recommended value for r is 20 ohm, 3w r r r r
industries corp. 5625-a s. arville, las vegas, nv 89118 tel:702-364-9998 fax: 702-364-1562 www.magtechind.com anz094i mechanical drawing model information ? single dc output lp1040-xx xx ? voltage rating, 10, 08, 09, 10 ??.. 24. ac input cable awg #18, two conductors ul pltc type or equiv. dc output cable awg #18, two conductors ul pltc type or equiv. mm [inch] 70 [2.76] 5 [0.20] (2x) 5 [0.20] (2x) 95 [3.74] lp1040 32 [1.26] 4 [0.16] (2x) 3.6 [0.14] (2x) 10 [0.39] (2x) 10 [0.39] (2x) ac input wires dc output wires
|
